MDXT-3 115V 50/60Hz &  230V 50/60Hz Models

Max. Flow rates 8.5 G.P.M


Series MDX are centrifugal magnetic drive pumps, eliminating the need for a shaft seal. These pumps can be serviced with a screwdriver. See the repair parts list for a breakdown of replacement parts.

Max Flow Max Head Power Electrical Submersible Inlet Outlet
8.5GPM/30 LPM 19FT/4 M .04HP/.029 KW 115V 50/60HZ or 230V 50/60HZ Non-Submersible 50/60 HZ 1/2" FPT 3/8" FPT

Wet End: PPolypropylene (Front Housing), Carbon filled Kynar (Rear Housing, Shaft), Ryton (Thrust Washer), Buna N (O-Ring), Stainless Steel (Screw) Ceramic Magnet


These pumps are not selfpriming, lack a suction lift, and thus require a flooded suction. These pumps cannot be run dry because the impeller requires the liquid being pumped for lubrication. For application assistance, contact March Pump.


Air cooled motors are available in different electrical configurations such as 115V 60Hz, 115V 50/60Hz, and 230V 50/60Hz, 1 phase. The motors are U.L. listed and rated as continuous duty.


  • O-Ring: Buna N or Viton


  • etching equipment
  • photographic processing equipment
  • ice flakers
  • plate procesors
  • marine air conditioning


eXTReMe Tracker